FIMA BEARING

Contact Us

Ministry of Foreign Trade:
Contact Manager Li  
+86-13914104141
Mailbox:info@femabearing.com

UC300

UC300

1: The steel frame and the outer ring are rigidly riveted, and the seal will not loosen due to excessive grease injection or impact vibration. 2: The triple sealing effect of two steel plates sandwiched with a layer of rubber can effectively prevent external dust intrusion. 3: The sealing effect is enhanced and the rotation speed is not affected. 4: Optimized space design, sufficient grease storage space, good sealing performance, 5: The grease replenishment period is twice that of ordinary products, save maintenance costs 6: steel skeleton of the external protection, more effectively prevent straw, hard particles and other damage to the sealing rubber

UC200

UC200

1: The steel frame and the outer ring are rigidly riveted, and the seal will not loosen due to excessive grease injection or impact vibration. 2: The triple sealing effect of two steel plates sandwiched with a layer of rubber can effectively prevent external dust intrusion. 3: The sealing effect is enhanced and the rotation speed is not affected. 4: Optimized space design, sufficient grease storage space, good sealing performance, 5: The grease replenishment period is twice that of ordinary products, save maintenance costs 6: steel skeleton of the external protection, more effectively prevent straw, hard particles and other damage to the sealing rubber

SER 200.

SER 200.

The outer ring of this product has a retaining ring at the outer diameter surface. The bearing is secured to the shaft with a hex fastening screw. This product simplifies the use of complex bearing boxes, such as assembly machine gear bearing boxes. Just like the UC-type components, this product is also ash-proof and waterproof.

HC200

HC200

This product is a UC bearing with eccentric self-locking ring. When the bearing rotates, the eccentric wheel and the collar on the inner diameter surface fix the shaft for the bearing. This bearing has high ash and water resistance because of the high-grade grease used in the sealing ring. This product can be widely used with a variety of conditions.

SC200

SC200

This product is a sealed bearing with the same thickness of inner ring and outer ring. The outer diameter of this assembly follows the 6200 grooved bearing and serves as the outer surface. It is widely used in roller conveyors, etc. The inner diameter capacity of this assembly is the same as that of a conventional bearing. It can be used in combination with h6 bearing shaft to achieve perfect compression value.

SB200

SB200

This product is a light-weight bearing series of UC bearings and is a grease-sealed ball bearing. This product is the most affordable, because it is not only small size, light weight, high load capacity.

SA200

SA200

The outer diameter of the inner ring and the inner diameter of the shaft sleeve have eccentric grooves, which can firmly fix the shaft on the bearing during rotation. The high-quality grease is also sealed in the bearing and is suitable for tight and lightweight components.

UKX 00

UKX 00

Tapered hole (with fasteners) UK2 (X, 3) ordinary UK2 (3) R3 triple sealing ring product is a grease sealed deep groove ball bearing composed of an outer ring of a spherical outer diameter surface equipped with an oil supply structure and an inner ring of a tapered hole. According to the sealing device, it is divided into two kinds: ordinary products (with oil seal and oil slinger) and triple sealing ring products (attached mark R3). The fixing to the shaft is carried out by means of fasteners. Type UK bearings (with fasteners) are best suited for long shaft applications. For UK type bearings, the nominal type of applicable fastener shall be attached after the nominal type of bearing.

UK300

UK300

Tapered hole (with fasteners) UK2 (X, 3) ordinary UK2 (3) R3 triple sealing ring product is a grease sealed deep groove ball bearing composed of an outer ring of a spherical outer diameter surface equipped with an oil supply structure and an inner ring of a tapered hole. According to the sealing device, it is divided into two kinds: ordinary products (with oil seal and oil slinger) and triple sealing ring products (attached mark R3). The fixing to the shaft is carried out by means of fasteners. Type UK bearings (with fasteners) are best suited for long shaft applications. For UK type bearings, the nominal type of applicable fastener shall be attached after the nominal type of bearing.

UCX 00

UCX 00

1: The steel frame and the outer ring are rigidly riveted, and the seal will not loosen due to excessive grease injection or impact vibration. 2: The triple sealing effect of two steel plates sandwiched with a layer of rubber can effectively prevent external dust intrusion. 3: The sealing effect is enhanced and the rotation speed is not affected. 4: Optimized space design, sufficient grease storage space, good sealing performance, 5: The grease replenishment period is twice that of ordinary products, save maintenance costs 6: steel skeleton of the external protection, more effectively prevent straw, hard particles and other damage to the sealing rubber

UK200

UK200

Tapered hole (with fasteners) UK2 (X, 3) ordinary UK2 (3) R3 triple sealing ring product is a grease sealed deep groove ball bearing composed of an outer ring of a spherical outer diameter surface equipped with an oil supply structure and an inner ring of a tapered hole. According to the sealing device, it is divided into two kinds: ordinary products (with oil seal and oil slinger) and triple sealing ring products (attached mark R3). The fixing to the shaft is carried out by means of fasteners. Type UK bearings (with fasteners) are best suited for long shaft applications. For UK type bearings, the nominal type of applicable fastener shall be attached after the nominal type of bearing.

< 1 > proceed page