FIMA BEARING

Contact Us

Ministry of Foreign Trade:
Contact Manager Li  
+86-13914104141
Mailbox:info@femabearing.com

GAC-F

GAC-F

Self-lubricating angular contact joint bearings, the inner and outer ring materials are bearing steel, quenched, the outer ring spherical surface is pasted with PTFE textile, and the inner ring spherical surface is plated with hard chromium. It has the characteristics of self-lubrication, wear resistance, self-aligning and low friction, and is suitable for mechanical mechanisms that bear radial load and axial load in a single direction.

GAC-T

GAC-T

(Paragraph 1) Self-lubricating angular contact joint bearings: The inner and outer ring materials are bearing steel, quenched and phosphated. The sliding surface is self-lubricating, wear-resistant, low friction, self-aligning, and can be lubricated by drilling blind holes on the sliding surface of the inner ring and inlaid with solid powder metallurgy wear-resistant materials. It has the characteristics of high bearing capacity, impact resistance and high temperature resistance. Suitable for mechanical mechanisms that bear axial loads in a single direction or combined radial and axial loads in harsh environments. (Paragraph 2) Self-lubricating angular contact joint bearings, the inner and outer ring materials are bearing steel, quenched, the outer ring spherical surface is pasted with PTFE textile, and the inner ring spherical surface is plated with hard chromium. It has the characteristics of self-lubrication, wear resistance, self-aligning and low friction, and is suitable for mechanical mechanisms that bear radial load and axial load in a single direction.

SIJK...C/SAJK...C

SIJK...C/SAJK...C

The self-lubricating assembled rod end joint bearing is assembled by the rod end body and the self-lubricating radial joint bearing GE…C or GE…ET-2RS. The rod end body material is carbon steel, and the surface is galvanized; no lubrication is required, and it has a large bearing capacity, The advantages of convenient installation and disassembly and simplified mechanism.

SI-ET-2RS/SA-ET-2RS

SI-ET-2RS/SA-ET-2RS

The self-lubricating assembled rod end joint bearing is assembled by the rod end body and the self-lubricating radial joint bearing GE…C or GE…ET-2RS. The rod end body material is carbon steel, and the surface is galvanized; no lubrication is required, and it has a large bearing capacity, The advantages of convenient installation and disassembly and simplified mechanism.

SI-C/SA-C

SI-C/SA-C

The self-lubricating assembled rod end joint bearing is assembled by the rod end body and the self-lubricating radial joint bearing GE…C or GE…ET-2RS. The rod end body material is carbon steel, and the surface is galvanized; no lubrication is required, and it has a large bearing capacity, The advantages of convenient installation and disassembly and simplified mechanism.

SIZJ/SAZJ

SIZJ/SAZJ

The rod end body of the self-lubricating assembled rod end joint bearing is made of carbon steel with galvanized surface; the outer ring material is bronze, and the sliding surface is lined with PTFE composite material without lubrication: the inner ring material is bearing steel, and the spherical surface is plated with hard chromium. The advantages of large carrying capacity, convenient installation and disassembly, and simplified mechanism.

SAZP...S

SAZP...S

The rod end body of the self-lubricating assembled rod end joint bearing is made of carbon steel with galvanized surface; the outer ring material is bronze, and the sliding surface is lined with PTFE composite material without lubrication: the inner ring material is bearing steel, and the spherical surface is plated with hard chromium. The advantages of large carrying capacity, convenient installation and disassembly, and simplified mechanism.

SIZP...S

SIZP...S

The rod end body of the self-lubricating assembled rod end joint bearing is made of carbon steel with galvanized surface; the outer ring material is bronze, and the sliding surface is lined with PTFE composite material without lubrication: the inner ring material is bearing steel, and the spherical surface is plated with hard chromium. The advantages of large carrying capacity, convenient installation and disassembly, and simplified mechanism.

SIBP...S

SIBP...S

The rod end body of the self-lubricating assembled rod end joint bearing is made of carbon steel with galvanized surface; the outer ring material is bronze, and the sliding surface is lined with PTFE composite material without lubrication: the inner ring material is bearing steel, and the spherical surface is plated with hard chromium. The advantages of large carrying capacity, convenient installation and disassembly, and simplified mechanism.

SA...E/SA...E

SA...E/SA...E

The assembled rod end joint bearing is assembled by the rod end body and the centripetal joint shaft GE... E or GE--ES. The rod end body is made of carbon steel and the surface is galvanized; it can be lubricated through the oil cup rod end eye hole, which has a large bearing capacity, The advantages of convenient installation and disassembly and simplified mechanism.

IF... E/SI... IS

IF... E/SI... IS

The assembled rod end joint bearing is assembled by the rod end body and the centripetal joint shaft GE... E or GE--ES. The rod end body is made of carbon steel and the surface is galvanized; it can be lubricated through the oil cup rod end eye hole, which has a large bearing capacity, The advantages of convenient installation and disassembly and simplified mechanism.

SQD

SQD

The outer ring of the single rod ball joint bearing is made of special zinc-based alloy. The material of the ball rod is carbon steel, which has the characteristics of self-aligning, wear resistance and easier installation. It is widely used in transportation vehicles, Packaging machinery, agricultural machinery and other mechanical institutions.

< 123 > proceed page