FIMA BEARING

Contact Us

Ministry of Foreign Trade:
Contact Manager Li  
+86-13914104141
Mailbox:info@femabearing.com

LME Series

LME Series

The linear bearing is composed of an outer cylinder, a steel ball, a steel ball retainer and a retaining ring at both ends. The retainer device is located in the outer cylinder and fixed by retaining rings at both ends, so that the steel balls can circulate repeatedly on the track surface without falling off. The outer cylinder is sufficiently heat treated to achieve considerable hardness to ensure safety and life during exercise. The steel ball retainer is made of resin, which can reduce the noise and wear between the steel ball and the retainer. The allowable use temperature is within 80 ℃.

LM Series

LM Series

The linear bearing is composed of an outer cylinder, a steel ball, a steel ball retainer and a retaining ring at both ends. The retainer device is located in the outer cylinder and fixed by retaining rings at both ends, so that the steel balls can circulate repeatedly on the track surface without falling off. The outer cylinder is sufficiently heat treated to achieve considerable hardness to ensure safety and life during exercise. The steel ball retainer is made of resin, which can reduce the noise and wear between the steel ball and the retainer. The allowable use temperature is within 80 ℃.

KH Series

KH Series

KH series linear bearings; Also known as mini linear bearings, also known as simple linear bearings \stamped linear bearings; There are three types of models: 1. KH unsealed series; 2. KH double seal series; 3. KH single seal series; KH unsealed series has the advantage of high temperature resistance and is widely used in linear automatic motion series machinery manufacturing industry.

MGW-C/MGW-H

MGW-C/MGW-H

MGN/MGW series applications include: semiconductor manufacturing equipment, printed circuit board IC assembly equipment, medical equipment, robotic arms, precision measuring instruments, office automation equipment, and other small linear sliding devices.

MGN-C/MGN-H

MGN-C/MGN-H

MGN/MGW series applications include: semiconductor manufacturing equipment, printed circuit board IC assembly equipment, medical equipment, robotic arms, precision measuring instruments, Office automation equipment, other small linear sliding devices.

EGW-/EGW-CB

EGW-/EGW-CB

EG series uses four rows of steel balls to bear the load design, making it have the characteristics of high rigidity and high load, and at the same time have the characteristics of four directions and other load, and the function of automatic centering, which can absorb the assembly error of the installation surface and obtain the demand of high precision. In addition, reducing the combination height and shortening the length of the slider, it is very suitable for high-speed automation industrial machinery and small equipment with space requirements. The slider is equipped with a steel ball retainer to prevent the steel ball from falling off. This design not only facilitates the customer to install the linear slide rail, but also does not cause the steel ball to fall off when the slider is removed, and has interchangeability under the accuracy.

EGW-SA/EGW-CA

EGW-SA/EGW-CA

EG series uses four rows of steel balls to bear the load design, making it have the characteristics of high rigidity and high load, and at the same time have the characteristics of four directions and other load, and the function of automatic centering, which can absorb the assembly error of the installation surface and obtain the demand of high precision. In addition, reducing the combination height and shortening the length of the slider, it is very suitable for high-speed automation industrial machinery and small equipment with space requirements. The slider is equipped with a steel ball retainer to prevent the steel ball from falling off. This design not only facilitates the customer to install the linear slide rail, but also does not cause the steel ball to fall off when the slider is removed, and has interchangeability under the accuracy.

EGH-SA/EGH-CA

EGH-SA/EGH-CA

EG series uses four rows of steel balls to bear the load design, making it have the characteristics of high rigidity and high load, and at the same time have the characteristics of four directions and other load, and the function of automatic centering, which can absorb the assembly error of the installation surface and obtain the demand of high precision. In addition, reducing the combination height and shortening the length of the slider, it is very suitable for high-speed automation industrial machinery and small equipment with space requirements. The slider is equipped with a steel ball retainer to prevent the steel ball from falling off. This design not only facilitates the customer to install the linear slide rail, but also does not cause the steel ball to fall off when the slider is removed, and has interchangeability under the accuracy.

Linear Slide

Linear Slide

If the customer orders non-standard length slide rails, the end face distance E should not be greater than 1/2P, so as to prevent the instability of the rear end of the slide rail assembly due to the excessive size of E and reduce the accuracy of the linear slide rail.

Slider

Slider

Flange type and square type linear slide rail, square type linear slide rail is divided into H type and L type, L type is H type low assembly linear slide rail, and its combination height is consistent with flange type linear slide rail.

HGW-CC/HGW-HC

HGW-CC/HGW-HC

HG series linear slide rails are four-row single-arc tooth contact linear slide rails. At the same time, they integrate the ultra-heavy load precision linear slide rails with optimized structural design, which improves the load and rigidity compared with other linear slide rails. With four-direction load characteristics and automatic centering function, it can absorb the assembly error of the mounting surface and obtain high-precision demands. The concept of high speed, high load, high rigidity and high precision has become the development trend of industrial products all over the world in the future.

HGW-CB/HGW-HB

HGW-CB/HGW-HB

HG series linear slide rails are four-row single-arc tooth contact linear slide rails. At the same time, they integrate the ultra-heavy load precision linear slide rails with optimized structural design, which improves the load and rigidity compared with other linear slide rails. With four-direction load characteristics and automatic centering function, it can absorb the assembly error of the mounting surface and obtain high-precision demands. The concept of high speed, high load, high rigidity and high precision has become the development trend of industrial products all over the world in the future.

< 1...345...15 > proceed page