FIMA BEARING

Contact Us

Ministry of Foreign Trade:
Contact Manager Li  
+86-13914104141
Mailbox:info@femabearing.com

SBPP Series

SBPP Series

The bearing box of this product is made of stamped steel plate, which can not only bear the required load, but also has the characteristics of light weight and low price. Suitable for light conveyor, light load, low speed occasions.

SAPP Series

SAPP Series

The bearing box of this product is made of stamped steel plate, which can not only bear the required load, but also has the characteristics of light weight and low price. Suitable for light conveyor, light load, low speed occasions.

SALF/SBLF Series

SALF/SBLF Series

This product is a compact light and heavy bearing assembly for UCFL Type 2 bearings. SBLF type 2 bearings and SALF type 2 bearings use hexagon set screws and eccentric self-locking rings to fix the bearing shaft respectively.

UCFB Series

UCFB Series

This product has only one-sided diamond seat, which can be fixed on the main body of the machine with 3 bolts. It can be widely used in occasions with small installation space and vertical installation surface.

UCPA Series

UCPA Series

This product is designed to reduce the installation space with vertical seat bearings. When the bearing housing is attached to the machine main body, two bolt holes are provided in the bottom surface of the bearing housing.

UCFC Series

UCFC Series

This product uses a hexagon head stop screw or an eccentric self-locking ring to secure the shaft. By fitting the boss portion into the mounting hole of the machine body, the bearing housing can be mounted in the correct position. This product is applied to the rotating drum, combined hole eccentric leveling when the best components.

UCT Series

UCT Series

This product uses hex-head stop screws or eccentric self-locking rings to secure the shaft and bearings. The bearing box can move radially along the guide rail groove. This product is the best component for axial distance adjustment, such as belt conveyor tension wheel

UKFL Series

UKFL Series

UKFL 2 (light load) UKFL 3 (Heavy Duty) This product uses a joint to secure the shaft and bearing. The rhombic bearing housing also reduces the mass of the bearing while minimizing the installation space. This product is the best component for compact mounting locations such as roller conveyors.

UCFL Series

UCFL Series

UCFL 2 (light load) UCFL X (Medium Load) UCFL 3 (Heavy Duty) This product uses two hex head stop screws or eccentric self-locking rings in the inner race to secure the shaft and bearing. The diamond bearing housing can be installed with two fixing bolts. Compared with the square seat bearing, the installation space and the total quality of this product are reduced. The center distance between the two mounting bolt holes of the diamond seat bearing box and the center distance between the two diagonal bolt holes of the square seat bearing box are the same, so they are interchangeable with each other.

UKF Series

UKF Series

UKF 2 (light load) UKF 3 (heavy duty) The tapered bit of this product makes it easy to use the joint to tightly fix the shaft and bearing. The bearing housing is easily mounted on the surface of the machine by 4 fixing bolts. Just like the bearing with vertical seat, this bearing is widely used as a middle bearing for long shafts.

UCF Series

UCF Series

UCF 2 (light load) UCF X (Medium Load) UCF 3 (heavy duty) The square housing of this product is suitable for installation on the side of the machine or on the vertical surface. Four fixing bolts are required for installation to ensure uniform load. This is the most widely used bearing shape. It combines maximum load capacity and long service life like a vertical seat bearing, thus saving operating costs.

UKP Series

UKP Series

UKP 2 (light load) UKP 3 (Heavy Duty) This product is designed to connect the installation of the thrust bearing to the axle block. It uses a joint to secure the shaft and the bearing. In addition to being used for conventional power transmission, it is also particularly suitable for non-conventional shafts, the middle of the long shaft and other occasions that require precise rotation.

< 123 > proceed page