LM...L series

Category:

Linear bearing

The linear bearing is composed of an outer cylinder, a steel ball, a steel ball retainer and a retaining ring at both ends. The retainer device is located in the outer cylinder and fixed by retaining rings at both ends, so that the steel balls can circulate repeatedly on the track surface without falling off. The outer cylinder is sufficiently heat treated to achieve considerable hardness to ensure safety and life during exercise. The steel ball retainer is made of resin, which can reduce the noise and wear between the steel ball and the retainer. The allowable use temperature is within 80 ℃.

Manager Li +86-13561234220

info@femabearing.com

Related Products

Online message

Key words:

Linear bearing

Model		Main Type Dimensions and Tolerances										Rated load		Static high runout	Weight
Sealed type	Steel ball column number	dr ( mm )	Tolerance ( Ц m)	D (Mm)	Tolerance ( Ц m)	L ( mm )	Tolerance ( Ц m)	B ( mm )	Tolerance ( Ц m)	W ( mm )	D ( mm )	Dynamic Co N	Static Co N	Static high runout	Weight
LM6LUU	4	6	0 -10	12	0 -13	35	0 -300	27	. -400	1.1	11.5	323	530	15	16
LM8LUU	4	8		15	0 -13	45		35		1.1	14.3	431	784		31
LM10LUU	4	10		19	0 -16	55		44		1.3	18	588	1100		62
LM12LUU	4	12		21		57		46		1.3	20	813	1570		80
LM13LUU	4	13		23		61		46		1.3	22	813	1570		90
LM16LUU	5	16		28		70		53		1.6	27	1230	2350		145
LM20LUU	5	20	0 -12	32	0 -19	80		61		1.6	30.5	1400	2740		180
LM25LUU	6	25		40		112	0 -400	82	0 -500	1.85	38	1560	3140	20	440
LM30LUU	6	30		45		123		89		1.85	43	2490	5490		480
LM35LUU	6	35	0 -15	52	0 -22	135		99		2.1	49	2650	6270		795
LM40LUU	6	40		60		151		121		2.1	57	3430	8040	25	1170
LM50LUU	6	50		80		192		148		2.6	76.5	6080	15900	25	3100
LM60LUU	6	60	0/-20	90	0/-25	209		170		3.15	86.5	7550	20000	30	3500